10 Foot Basic Horse Stall Fronts
Our 10 foot wide by 7 foot tall Basic Horse Stall Front with steel frame comes with wood included and with grill sections in door and to the side of the door, 8 foot sliding door track and guide assembly, and 48" x 88" sliding horse stall door which can be installed on either side of the stall your choice. This stall front measurement is 7 foot tall and 10 foot wide. This is just the stall front. Dividers and optional stall items such as feeders, feed openings, drop down windows can be found in their own categories.
Our horse stall grills are 7/8" outside diameter schedule 40 11 gauge steel tubing 4 inches on center giving a space of approximately 3.25 inches between the bars. The steel tubing in the grills are welded and will not turn or rattle. Both ends of the bars are welded in the frame and will not turn or rattle. These bars do not give when pushed on.
The wood used in our stalls is 8 inch tongue and groove v groove southern yellow pine. The wood is not treated or finished, it will be up to you to stain or finish the wood after you have the stall installed in your barn. The wood can be installed either vertically or horizontally your choice just let us know at the time you place your order. The wood on this horse stall front starts at the floor and comes up 4 foot and the steel horse stall grill goes the remaining 3 feet to the top of the stall frame.
These stall fronts are all made of 11 and 12 gauge 1 piece all welded steel frames. By using heavier gauge steel frames than most of our competitors, our stall fronts are very well built and heavier than most of our competitors.
Color on our horse stall steel frames and grills is standard black but you have your choice of colors. Our stalls are all painted steel. We use Sherwin Williams undercoat and then two outer coats of Sherwin Williams paint. If you want we can have your horse stall frames powder coated at an additional charge. Powder coating leaves a much harder finish and will extend the life of your stall paint finish.
This Basic Horse Stall Front Can Be Either Conventional, Free Standing, Or Modular! If your barn does not have posts not a problem these fronts can attach to the stall dividers with heavy duty 1 inch diameter steel pins. At the time you place your order we can discuss how your stalls will attach to your barn walls or posts or to no posts at all.
Illiana Horse Stalls
Rockville Indiana 47872
|Category:||Stalls and Stables|
|Location:||Greene, ME 04236|
|Country:||United States of America|
we're sorry, this ad is no longer available.