10 Foot Basic Horse Stall Front
THESE STALL FRONTS ARE MADE OF 1 PIECE WELDED 11 AND 12 GAUGE STEEL FRAMES!
THESE ARE HEAVY DUTY HORSE STALLS!
Our Basic Horse Stall Fronts comes with wood included and with grill sections in door and to the side of the door, 8 foot sliding door track and guide assembly, and 48" x 88" sliding horse stall door which can be installed on either side of the stall your choice just choose in the upper right under options before adding to the cart. This stall front is 8 foot from outer edge to outer edge and 7 foot tall.
Our horse stall grills are 7/8" outside diameter schedule 40 11 gauge steel tubing 4 inches on center. The steel tubing in the grills are welded and will not turn or rattle. The bars are welded in the frame and will not turn or rattle. There is approximately 3.25 inches in between the bars. These bars do not give when pushed on.
The wood used in our stalls is 8 inch tongue and groove v groove southern yellow pine. The wood is not treated or finished, it will be up to you to stain or finish the wood after you have the stall installed in your barn. The wood can be installed either vertically or horizontally your choice just choose to the upper right under options before adding to cart. The wood on this horse stall front starts at the floor and comes up 4 foot and the steel horse stall grill goes the remaining 3 feet to the top of the stall frame.
These stall fronts are all made of 11 and 12 gauge 1 piece all welded steel frames. By using heavier gauge steel frames than most of our competitors, our stall fronts are very well built and heavier than most of our competitors. These are heavy duty horse stalls!
Color on our horse stall steel frames is standard black but you have your choice of colors. Our stalls are all painted steel. We use Sherwin Williams undercoat and then two outer coats of Sherwin Williams paint. If you like we can have your horse stall frames powder coated at an additional charge. Just make sure you ask us for a powder coating when you talk to us.
These Horse Stall Fronts Can Be Either Conventional, Free Standing, Or Modular!
For the same price these stall fronts can be either conventional, free standing or modular stalls your choice. If your barn does not have posts not a problem these fronts can attach to the stall dividers with heavy duty 1 inch diameter steel pins. At the time you place your order we can discuss how your stalls will attach to your barn walls or posts or to no posts at all.
7 Foot Tall Basic Fronts With Wood Included
IHS0810 - 8 Foot Wide - $700.00
IHS1010 - 10 Foot Wide - $725.00
IHS1210 - 12 Foot Wide - $750.00
IHS1410 - 14 Foot Wide - $775.00
IHS1610 - 16 Foot Wide - $800.00
IHS2010 - 20 Foot Wide - $850.00
8 Foot Basic Tall Fronts With Wood Included
IHS08108FT - 8 Foot Wide - $795.00
IHS10108FT - 10 Foot Wide - $850.00
IHS12108FT - 12 Foot Wide - $905.00
IHS14108FT - 14 Foot Wide - $960.00
IHS16108FT - 16 Foot Wide - $1010.00
IHS20108FT - 20 Foot Wide - $1090.00
7 Foot Tall Basic Fronts Without Wood
IHS0801 - 8 Foot Wide - $530.00
IHS1001 - 10 Foot Wide - $552.00
IHS1201 - 12 Foot Wide - $572.00
IHS1401 - 14 Foot Wide - $600.00
IHS1601 - 16 Foot Wide - $625.00
IHS2001 - 20 Foot Wide - $678.00
8 Foot Tall Basic Fronts Without Wood
IHS08018FT - 8 Foot Wide - $575.00
IHS10018FT - 10 Foot Wide - $625.00
IHS12018FT - 12 Foot Wide - $675.00
IHS14018FT - 14 Foot Wide - $730.00
IHS16018FT - 16 Foot Wide - $785.00
IHS20018FT - 20 Foot Wide - $865.00
Optional Accessories For Our Basic Stall Fronts
•IHS3700 - Swing Horse Stall Hay and Grain Feeder - $175.00 - Installs Opposite Side Of Stall Door
IHS3712 - Steel Swing Out Horse Stall Grain Feeder - $75.00 - Installs Opposite Side Of Stall Door
IHS3702 - Swing Out Horse Stall Bucket Rack - $90.00 - Installs Center Bottom Of Stall Front
IHS1309 - 10" x 10" Feed Opening - $25.00 - Installs Corner Opposite Of Stall Door
IHS3209 - Drop Down Grilled Feed Opening - $75.00 - Installs In Stall Door Or Stall Grill In Front
IHS3214 - 20" x 40" Grilled Swing Open Window - $75.00 - Installs Corner Opposite Stall Door
IHS1791 - Thru The Wall Grain Feeder - $45.00 - Installs Opposite Of Stall Door
IHS3900 - 4 Sets Hinged Mounts On 4 Stall Front Corners - $65.00 Allows You To Pull Pins On One End Of Front Or The Other To Swing The Whole Stall Front Open For Easy Cleaning - Post Face Mounting Only!
IHS3901 - Optional Black Powder Coat Finish On Steel Parts Of Stalls Pricing Depends On Your Entire Order!
Shipping & Pickup Options For This Item
Local Pickup At Our Business Rockville Indiana (47872 )
Delivery Via Our Truck - Our delivery truck rate is $2.80 per loaded mile from Rockville Indiana 47872.
If you have any questions before placing your order please email those questions to us at firstname.lastname@example.org . Allow up to 24 hours Monday - Friday and 48 hours over the weekend to receive a response back to your request.We will do our best to answer all questions promptly with most being answered within 24 hours. You may also call us at 888-568-2035 Monday-Friday from 8-5 eastern to ask questions.
How To Order!
Give us a call us at 888-568-2035 Monday-Friday from 8:00 AM to 5:00 PM eastern time to place your order by phone.
If you are ordering horse stalls, round pens, livestock feeders or larger items your order will be ready to pickup or be shipped or delivered in 3-4 weeks. Larger orders or custom orders may take 3-6 weeks. Horse run in sheds and livestock shelters will take 2-3 weeks. Most of the items we sell are all made to order, we do not stock stalls, pens, gates, sheds or livestock feeders. We do have a quantity of some of the smaller feeders and items in stock most of the time.
Illiana Horse Stalls
Rockville Indiana 47872
|Category:||Stalls and Stables|
|Location:||Frankfort, KY 40604|
|Country:||United States of America|
we're sorry, this ad is no longer available.